Download handleiding

Download brochure

Q-Acoustics Q-TV Speaker Systeem
Full HD geluid achter uw TV

Als het aan Q Acoustics ligt zijn de dagen van tig-delige en flink besnoerde home cinema geluidssystemen voorbij. Zij hebben een foefje op de markt gebracht dat menig audiofiel de oren zal doen spitsen. En menig niet-audiofiel ook, trouwens. Wat met dit simpele systeem geeft u het standaard geluid op uw (HD)flatscreen een enorme kwaliteitsboost… zonder een hoop speakers en met nog geen halve meter kabel!

Hoe krijgen ze het voor elkaar?
Met een hele hoop wetenschap en techniek die niet een-twee-drie op te sommen is, maar het principe is uit te leggen: de speakers aan weerszijden verspreiden ten eerste een veel groter bereik aan frequenties dan de TV, en ten tweede op zo’n manier dat u niet per se precies in het midden hoeft te zitten om het stereo geluid op zijn best te horen. De ‘sweet spot’ zit bij normale stereo speakers in een heel klein belletje in het midden, net waar het geluid uit de twee (of meer) speakers elkaar treft. Door de manier waarop het geluid uit de Q-TV2 komt, is die sweet spot uitgebreid tot een hele brede hoek voor de TV waar iedereen van kan genieten.

Extra met minder
Dit geluidsysteem betekent echt een boost voor het geluid van elke HD flatscreen. De bassen zijn veel dieper, de hoge frequenties veel frisser en het overall geluid wordt een stuk preciezer. Door het bereik van de speakers worden alle kijkers in de belevenissen meegevoerd, niet alleen de geluksvogel die zich in de sweet spot heeft gewurmd toen de rest van het huishouden niet keek. Toch is dit enorme effect bereikt met een relatief klein en makkelijk te bevestigen apparaat. De Q-TV2 past op iedere flatscreen tussen 30” en 42” inch en betekent voor altijd een einde aan ruzie met kabels, huisgenoten en trossen speakers. Iedereen in de sweet spot voor een even sweet deal.
Voor de mensen met een grotere tv is er de Q-TV2X, deze past op iedere flatscreen tussen de 42" en 50". 



Satellites
Speaker type: Sealed box with wide dispersion
Drivers: 2 x 15w 3cm x 12cm Balance Mode Radiator
Frequency Response: (+/- 3dB) 180Hz - 20kHz
Power: 25Wrms per satellite

Subwoofer
Speaker type: Force cancelled bass reflex with dynamic EQ
Drivers: 4 x 15w 3cm x 12cm bass driver
Frequency Response: (+/- 3dB) 50Hz - 180Hz
Power: 50Wrms

Kijkt u voor meer informatie en beelden in de brochure en handleiding die u rechts boven de text kunt bekijken.

Demonstratie video

Specificaties

Meegeleverd
Q-TV2(x) (2 x Satellite luidsprekers / Active Subwoofer)
2 Haken en schroeven
Electriciteitskabel
1 meter mini-jack kabel
1 meter Phono / RCA kabel
Gebruiksaanwijzing
Afstands bediening met batterijen


Q-TV2X (42" to 50")
Upgrade your TV experience and enjoy HD Sound
100w 2.1 Stereo system
Ultra-slim, vibration-free subwoofer
'BMR' drivers for wide sound dispersion
One size fits all
Adjusts to fit any 42" to 50" screen
Plug and Play
Simple to connect
No speaker cables required
3 x EQ setups to suit environment
Easy to use
Uses existing TV remote
Auto standby when not in use (with low power consumption)
Auxiliary Input
Connect an iPod or other personal audio player
Digital 'Lip-Sync' adjustment

Q-TV2X (30" to 42")
Upgrade your TV experience and enjoy HD Sound
100w 2.1 Stereo system
Ultra-slim, vibration-free subwoofer
'BMR' drivers for wide sound dispersion
One size fits all
Adjusts to fit any 30" to 42" screen
Plug and Play
Simple to connect
No speaker cables required
3 x EQ setups to suit environment
Easy to use
Uses existing TV remote
Auto standby when not in use (with low power consumption)
Auxiliary Input
Connect an iPod or other personal audio player
Digital 'Lip-Sync' adjustment

Why is it different?
The Q-TV System uses 'BMR' (Balanced Mode Radiator) loudspeaker drivers which not only give exceptional sound performance but also have very wide dispersion. This means, wherever you sit in your room, you'll still enjoy the full hi-fi or home cinema experience. Additionally, because the advanced BMR drive units we employ are extremely narrow, (only 131mm x 29mm), we have been able to make the whole Q-TV system incredibly slim. The subwoofer is an astonishing 38mm deep and easily hidden when mounted on the rear of the TV screen.

What size screens will Q-TV fit?
Q-TV2 fits 30" to 42" flat screen TVs. (Q-TV2 can be adjusted from 785mm to 1050mm)
Q-TV2X fits 42" to 50" flat screen TVs. (Q-TV2X can be adjusted from 1051mm- 1315mm)

Surely if the Subwoofer is mounted to the screen the vibration will damage the TV and blur the picture?
No, the subwoofer is a special 'force-cancelling' design. This means that, even at high volumes there is almost no cabinet vibration - very unusual for a subwoofer! So no screen damage and sharp, clear pictures.

How does it fit to the screen?
With the two vertical mounting rails supplied, the Q-TV2 and Q-TV2X bolt to the 'VESA' holes in the rear of your screen. This takes only a few minutes and then you're ready to plug-in and listen to wonderful, hi-fi quality sound. Naturally, everything you require to fit the Q-TV to your flat screen is included in the box.

What connections are needed to the TV?
The simplest way is to take an output from the TV screen's headphone socket to Q-TV2. In this way, Q-TV2 is seamlessly controlled from the standard TV remote control and virtually invisible in use.
If there is no headphone output, then use the line-out or optical output from the TV. When connected in this way, volume is controlled by Q-TV2's own remote handset.

My connection sockets are on the back of my screen, how will I be able to fit the plugs?
Often the terminal panel of the TV is recessed, but if the plugs protrude or if the back of the screen isn't flat then spacers are supplied to hold Q-TV away from the screen. Accessing the terminals is easy - just unclip the subwoofer at the top and lean it back to gain access.

Can I still use my existing (manufacturer's) table stand?
Yes, Q-TV2 attaches to the rear of the screen and both are supported by the table stand.

Can I wall mount?
An optional wall bracket is available. This holds both the screen and Q-TV flat to the wall. The wall to screen depth is kept to a minimum. Additionally, the wall bracket can be attached to a cantilever bracket, enabling both screen and speaker system to be angled towards your preferred viewing position.

Is it possible to connect rear effect speakers?
No, Q-TV takes its audio signal from the TV which provides only left and right stereo signals, there is no rear effect signal available.

What cables do I need?
The system is supplied with a 3.5mm mini jack lead for connection of Q-TV to the TV's headphone socket. Also supplied is a phono lead for connection to the TV's line output. If your TV has neither of these you will need to use an optical (toslink) lead - not supplied.

When using a digital box the picture and sound may seem out of step - does Q-TV address this issue?
Often the digital video signal has more electronic processing than the audio signal, this delays the picture to a point where speech and image are not synchronised. To counter this problem Q-TV has a variable digital audio delay adjustment - users can then adjust the sound, step-by-step until it perfectly matches the picture.

Can other equipment be played through Q-TV?
Yes, there is an auxiliary input - this can be used for audio playback from an iPod, CD player or other portable players.

Do I have to turn on Q-TV2 every time I want to watch TV?
No. Q-TV has signal-sensing power on/off. When you turn on your TV, Q-TV turns itself on automatically. When you switch your TV off, Q-TV goes into 'standby'. This means you not only save electricity but Q-TV is seamless in its operation - fit and forget!